1* |
|
Cylinder block 12883 decoking without grinding the valves or replacing the cylinder head gasket. |
2* |
|
Same operation as No 1 but with replacement of the cylinder head gasket 11141. |
3* |
|
Cylinder decoking and valve grinding without cylinder head gasket replacement. |
4* |
|
Cylinder decoking and valve grinding with cylinder head gasket replacement. |
5 |
|
Replacement of a valve 10937 including engine decoking and valve seat grinding, without changing the cylinder head gasket or water hoses. |
5bis |
|
In addition, per additional valve. |
6 |
|
Replacement of a valve, including engine decoking and valve seat grinding, without changing the cylinder head gasket or the water hoses, plus grinding of existing valves. |
7 |
|
Same operation as no. 6 but with cylinder head gasket replacement |
8 |
|
Same operation as no. 6 but with replacement of the upper water rubber hose. |
9 |
|
Same operation as no.6 but with replacement of cylinder head gasket and water hose. |
10 |
|
Replacement of 4 valves including reaming of valve guides |
11 |
|
Same operation as no 10 but with replacement of the cylinder head gasket. |
12 |
|
Same operation as no. 10 with replacement of the upper water rubber hose. |
13 |
|
Same operation as no. 10 with replacement of cylinder head gasket and top water rubber hose. |
14 |
|
Replacement of 8 valves including valve guides reaming. |
15 |
|
Same operation as no. 14 with cylinder head gasket replacement. |
16 |
|
Same operation as no. 14 but with replacement of the upper water rubber hose. |
17 |
|
Same operation as no. 14 but with replacement of the cylinder head gasket and the upper water rubber hose. |
18 |
|
Replacement of 1 valve spring. |
19 |
|
Valve tappet 30562 adjustment. |
20 |
|
Grind and adjust valve tappets |
21 |
|
Replacement of a valve tappet |
21bis |
|
Extra for each additional valve tappet. |
22 |
|
Replacement of a valve tappet guide 10940. |
22bis |
|
Additional: per additional valve tappet guide. |
23 |
|
Replacement of a valve tappet and its guide. |
24* |
|
Disassembly of a group of cylinders for examination, reassembly including replacement of the cylinder head gasket. |
25* |
|
Replacement of gudgeon pins 31090 including decoking and valve grinding |
25bis |
|
one piston ring only 11044 |
25ler |
|
For each additional piston ring on the same piston. |
26* |
|
Same operation as no. 25 but with replacement of the cylinder head gasket. |
27* |
|
Replacement of a piston 12881 with gudgeon pin 31090 and piston rings. |
27bis |
|
Price per additional piston. |
28 |
|
Same operation as no. 27 but with replacement of the cylinder head gasket. |
29 |
|
Replacement of a stud broken inside the cylinder block, including decoking. |
30 |
|
Same operation as no. 29 but with replacement of the cylinder head gasket. |
31 |
|
Same operation as no. 29 but with replacement of an upper coolant hose. |
32 |
|
Same operation as 29 but with replacement of the cylinder head gasket and the upper coolant hose. |
33 |
|
Replacement of damaged stud with special stud and decoking. |
34* |
|
Replacement of a cylinder block including piston rings replacement. |
35* |
|
Replacement of a cylinder block including pistons, gudgeon pins and piston rings |
36* |
|
Disassembly of cylinder block for re-boring from 55mm to 55.3mm and supply of pistons, piston rings and gudgeon pins, reassembly and test. |
37* |
|
Replacement of cylinder head plus gasket replacement and decoking . |
38 |
|
Same operation as no. 37 but with valve grinding |
39 |
|
Drain the engine oil and clean the filter. |
40 |
|
Disassembly and reassembly of the engine to free one connecting rod and check the others. |
41 |
|
disassembly of the engine to adjust the longitudinal play of the crankshaft 10936, reassembly and test. |
42 |
|
Engine disassembly for crankshaft grinding, replacement of main11893 / 11894 / 11014 and big end 31369/31332 bearings, reassembly and testing. |
43 |
|
Replacement of the crankshaft gear 30913. |
44* |
|
Adjust the lateral clearance of the camshaft 30804. |
45* |
|
Adjust the diametral clearance of the camshaft. |
46 |
|
Replacement of the magneto drive shaft. |
47* |
|
Adjust the play in the magneto drive 31472. |
48 |
|
Replacement of the ball bearings on the magneto drive shaft. |
49 |
|
Replacement of the magneto drive shaft and its ball bearings. |
50* |
|
Check for oil flow to the distribution area |
51 |
|
Replacement of the oil sump 12846. |
52 |
|
Replacement of the timing case housing 30549. |
53 |
|
Refit the engine in the frame, replace the ball joint 11943 and its support 11897, including if necessary the bushing of the timing case housing |
54 |
|
Tighten the engine in place without replacing the ball joint , but including replacement of the necessary bolts. |
55 |
|
Replacement of the front support bracket 11897 without replacing the ball joint. |
56 |
|
Re-welding the engine block arms. |
57 |
|
Same operation as no.56 but with replacement of the front support 11897 and ball joint. |
58 |
|
Replacement of the sump of a crashed engine without replacing any other part. |
59 |
|
Replacement of upper water rubber hoses. |
60 |
|
Replacement of lower water rubber hoses. |
61 |
|
Replacement of the four water rubber hoses. |
62 |
|
replace the exhaust manifold 11001 |
63 |
|
Check the ignition timing point. |
64 |
|
Cleaning and adjusting spark plugs |
65 |
|
Exchange at the factory of a 7.5h.p. engine with «SOLEX» carburettor and magneto but without spark plugs, for an engine entirely refurbished by the Factory. |